9800 Series Software Download


The following DOS based software packages are free. Each package is specific to a particular model of 9800.
To use the software unzip it into a folder on your computer harddrive or to a thumb drive. Double-click the executable (.exe) file to run it. The software will open in a Command Window and your mouse will not be active within the program.

The software is Windows compatible and has been tested on the following operating systems:

Windows 8.1 Professional (x86), Windows 7 Professional (x86), Windows XP SP3 (x86)

--- This software will NOT run within 64 bit operating systems. ---

--- Your computer must have a physical RS-232 serial port (USB converters will not work) ---


This software is used to upload and download project files.
Here is a Reference Document to help guide you through this process.

9213 Software for 9800 with Allen-Bradley PLC-5 DH+ & DF1 Interface.

9214 Software for 9800 with Allen-Bradley SLC500 DH485 & DF1 Interface.

9215 Software for 9800 with Modbus RTU Master Interface.

9216 Software for 9800 with Allen-Bradley PLC-2 Interface.

9217 Software for 9800 with GE Series Ninty Interface.

9219 Software for 9800 with Siemens S5 Interface.

9220 Software for 9800 with Mitsubishi FX Interface.

9228 Software for 9800 with Generic ASCII Interface.

9229 Software for 9800 with Omron Interface.




This software is Windows compatible and has been tested on the following operating systems:

Windows 8.1 Professional (x86), Windows 7 Professional (x86), Windows XP SP3 (x86)

This software can be used to configure the AB, GE, and Modbus versions of 9800.



--- This software will NOT install within 64 bit operating systems. ---

ScreenMaker 9000 Software Package

File name: qsm9000_v113.zip

When unzipped the following file is produced:
Quartech ScreenMaker9000 Software Installer V1.00.exe


The 9800 SLC504 DH+ unit can only be configured using ScreenMaker 9000 since it has no DOS software package.
The SLC504 DH+ units include the 9800-AC-AB-3-5 and 9800-DC-AB-3-5.



If you are using a computer that does not have a hardware RS-232 serial port then a
USB to Serial Adpater will be required. Not all USB to Serial Adapters work with all
devices. We have had execellent results using the TRIPP-LITE Keyspan USA-19HS.


The LegendMaker application is used to create function key labels, printed using your ink jet or laser printer, that can be inserted into the key pockets of the 9800. The pocket are exposed by removing the bezel from the keypad. It is best to apply an adhesive backed laminating film to the front and back of the label. This will add strength and provide additional moisture protection.

LegendMaker - Printed Legend Tag Software

File name: legendmaker2-v200.zip

When unzipped the following file is produced:
Quartech LegendMaker II Software Installer V2.00.exe


 

This software is Windows compatible and has been tested on the following operating systems:

Windows 8.1 Professional (x86 + x64), Windows 7 Professional (x86 + x64), Windows XP SP3 (x86)


The original 16 bit version of LegendMaker (V1.05) can be downloaded here but can not be installed in 64 bit operating systems.