/!-- page starts under the tab image.. add some margin -->
9113-1-1 Communication Cables
Serial RS-232 Cables
The 2180-3 cable connects the 9113 to the Ultra 3000 CN3 port.
(This cable is supplied with the 9113-1-1.)
Baud Rate: 38,400:
Byte format is fixed at drive default:
8 Data Bits, No Parity, 1 Stop Bit
The serial communication port of the 9113 uses RS-232 signal levels. A six pin circular mini-DIN plug must be used on the 9113 end of all communication cables.
Pin 1 - No Connection
Pin 2 - Transmit Data
Pin 3 - Receive Data
Pin 4 - Request-To-Send
Pin 5 - Clear-To-Send
Pin 6 - Signal Common
The 9113 operates with standard Ethernet cables available from many sources.
The examples below are consistent with the TIA/EIA 568 color code standards.
© 2016 Quartech Corporation