ScreenMaker 2000K & 2800K Software Download



These software packages are provided free of charge. The packages include everything needed to configure the 2800, plus create and load projects.



Important Notice:


ScreenMaker 2800K was created as a solution for users running 64 bit Windows operating systems.

Please be aware of the following:
  -- You can upload a project from an existing 2800 even if it were loaded using ScreenMaker 2000K.
  -- ScreenMaker 2800K CAN NOT open a project file created with ScreenMaker 2000K.
  -- ScreenMaker 2000K CAN NOT open a project file created with ScreenMaker 2800K.


This software is Windows compatible and has been tested on the following operating systems:

Windows 10, 8.1, 7 Professional (x86 + x64), Windows XP SP3 (x86 only)


--- This software will install within 32 bit and 64 bit operating systems. ---

Includes Sample_Project_V3.1 (Indexing, Jog, and Velocity modes)

ScreenMaker 2800K Software Package

(with Hardware Version 1 and 2 Firmware Drivers)


File name: qsm2800k_v104.zip

Do Not install directly from the zip file!

When unzipped the following file is produced:
Quartech ScreenMaker 2800K Software Installer V1.04.exe



This software is Windows compatible and has been tested on the following operating systems:

Windows 8.1 Professional (x86), Windows 7 Professional (x86), Windows XP SP3 (x86)


--- This software will NOT install within 64 bit operating systems. ---

ScreenMaker 2000K Software Package

(with Hardware Version 1 and 2 Firmware Drivers)


File name: qsm2000k_v3401.zip

When unzipped the following file is produced:
Quartech ScreenMaker2000K Software Installer V2.02.exe


Version 2 firmware drivers are required with a 2800 that has a serial number greater than 54542.

Older Software Version

--- Use this software to modify a 2800-Durant-3K unit ---

ScreenMaker 2000K   (not for new projects)

File name: QSM2000K_V2001.zip

When unzipped the following file is produced:
Install_ScreenMaker2000K_V2001.exe


Use this software to upload a project from a 2800 that has a firmware verision prior to version 3.00. The firmware version is displayed during the 2800 power-up with DIP switch 4 off (normal operation mode). The firmware version appears on the second screen displayed after power-up.


Notice: DO NOT overwrite firmware in a 2800-Durant unit.



If you are using a computer that does not have a hardware RS-232 serial port then a
USB to Serial Adpater will be required. Not all USB to Serial Adapters work with all
devices. We have had execellent results using the TRIPP-LITE Keyspan USA-19HS.


The LegendMaker application is used to create function key labels, printed using your ink jet or laser printer, that can be inserted into the key pocket of the 2813. The pocket is exposed by rolling back the rubber gasket at the bottom left corner. It is best to apply an adhesive backed laminating film to the front and back of the label. This will add strength and provide additional moisture protection .

LegendMaker - Printed Legend Tag Software

File name: legendmaker2-v200.zip

When unzipped the following file is produced:
Quartech LegendMaker II Software Installer V2.00.exe


This software is Windows compatible and has been tested on the following operating systems:

Windows 8.1 Professional (x86 + x64), Windows 7 Professional (x86 + x64), Windows XP SP3 (x86)


The original 16 bit version of LegendMaker (V1.05) can be downloaded here but can not be installed in 64 bit operating systems.