2800 Operator Terminal (Ultra 3000)


The 2800 is a low cost operator terminal that can be configured for compatibility with many devices by downloading product firmware. This document describes the 2800 with Ultra 3000 product firmware.

A new 2800 is shipped without any product firmware preloaded. Instruction for loading firmware into the unit can be found under the software tab and within the configuration software help file.

The 2800 is fully programmable using ScreenMaker 2000K Windows based off-line software which is provided free of charge. Text, data and recipes can be combined in order to produce screens that directly correspond to the current drive application. Variables can be defined as read only or read/write with entry limit protection.

The Next and Prev keys allow the operator to navigate through 2800 screens in an order determined by the project developer.

The four function keys can be redefine on each screen. Each key can be configured to manipulate parameters within the drive.
They can also be configured as additional screen triggers. A slip-in legend tag allows the the function keys to be custom labeled. LegendMaker software makes it easy.


Direct connect operator terminal for the Ultra 3000


The 2800 is designed to communicate with one or more Ultra 3000 servo drives.
It uses the Host Reference communication protocol allowing it to monitor and display
most parameters associated with velocity, torque, position, and indexing.


Project screens are created using ScreenMaker 2000K which is a free Windows application. ScreenMaker includes extensive integrated help that provides assistance when and where you need it. Sample projects are provided to get you started.


The easy way to network Ultra 3000 Drives....

The Model 9109K Termination Adapter
makes networking Ultra 3000 Drives
easy and more reliable.

Download the PDF tech sheet TS9109K-Rev0



Product Features...